Compression Pylon

A compression pylon for an aircraft with a wing-mounted engine, that does not cause supersonic airflow to occur within the fuselage-wing-pylon-nacelle channel is presented. The chord length of the pylon is greater than the local chord length of the wing to which it is attached. The maximum thickness of the pylon occurs at a point corresponding to the local trailing edge of the wing. As a result, the airflow through the channel never reaches supersonic velocities

Wingtip vortex turbine

A means for extracting rotational energy from the vortex created at aircraft wing tips which consists of a turbine with blades located in the crossflow of the vortex and attached downstream of the wingtip. The turbine has blades attached to a core. When the aircraft is in motion, rotation of a core transmits energy to a centrally attached shaft. The rotational energy thus generated may be put to use within the airfoil or aircraft fuselage

Wingtip vortex dissipator for aircraft

A means for attenuating the vortex created at aircraft wingtips which consists of a retractable planar surface transverse to the airstream and attached downstream of the wingtip which creates a positive pressure gradient just downstream from the wing is presented. The positive pressure forces a break up of the rotational air flow of the vortex

Symposium on Intracellular pH, PCO₂ and PO₂: Introductory Remarks

It is a pleasure to welcome the three authorities who will carry the major load of presentations in our symposium today. They are Dr. Frans Jöbsis of Duke University School of Medicine, Dr. Eugene Robin of The University of Pittsburgh School of Medicine, and Dr. Norman Carter of The University of Texas Southwestern Medical School. We are also grateful for the presence of Dr. Lutz Kiesow of the Naval Medical Research Institute, Bethesda, Maryland. Dr. Kiesow will assist in the discussions to be held after each major presentation. Each of these men is an international authority in his field, and we are more than fortunate to have this group with us today

Flight tests of vortex-attenuating splines

Visual data on formation and motion of lift-induced wingtip vortex were obtained by stationary, airflow visualization method. Visual data indicated that vortex cannot be eliminated by merely reshaping wingtip. Configuration change will likely have only small effect on far-field flow

How to Grow Strawberries in the Home Garden

PDF pages: 1

Thrust-augmented vortex attenuation

An experimental investigation was conducted to determine the vortex attenuating effect of engine thrust. Tests were made using a 0.03-scale model of the Boeing 747 transport aircraft as a vortex generating model. A Learjet-class probe model was used to measure the vortex induced rolling moment at a scale separation distance of 1.63 km. These tests were conducted at a lift coefficient of 1.4 at a model velocity of 30.48 m/s. The data presented indicate that engine thrust is effective as a vortex attenuating device when the engines are operated at high thrust levels and are positioned to direct the high energy engine wake into the core of the vortex. The greatest thrust vortex attenuation was obtained by operating the inboard engine thrust reversers at one-quarter thrust and the outboard engines at maximum forward thrust

An investigation of the increase in vortex induced rolling moment associated with landing gear wake

Flight tests were conducted to verify the results found in ground base facilities of the effect of span lift load variation as well as the vortex attentuation of the high energy jet engine exhaust through proper thrust programming. During these flight tests a large increase in vortex strength was experienced as a result of extending the landing gear. Tests in the Langley Vortex Research Facility indicate that the wake produced by the landing gear may possibly form an aerodynamic endplate or reflection plane at the inboard edge of each inboard flap which increases the effective aspect ratio of the flap and thereby increases the strength of the flap outer edge vortex

A static air flow visualization method to obtain a time history of the lift-induced vortex and circulation

A recently proposed method of flow visualization was investigated at the National Aeronautics and Space Administration's Langley Research Center. This method of flow visualization is particularly applicable to the study of lift-induced wing tip vortices through which it is possible to record the entire life span of the vortex. To accomplish this, a vertical screen of smoke was produced perpendicular to the flight path and allowed to become stationary. A model was then driven through the screen of smoke producing the circular vortex motion made visible as the smoke was induced along the path taken by the flow and was recorded by highspeed motion pictures